Numbered 64301 to 65745 (approx). Integral seat stays with cam type chainstays for rear wheel adjustment.
WM2x19 (f), WM2x19 (r). Rear, QD with taper roller bearings. Chrome rims. Black spokes with NPB nipples. Rear sprocket integral with brake drum on LHS.
Inverted U section, both valanced, front with bottom splash guard. Rear with detachable main section.
‘Aero type petrol tank chrome plated with painted panels with Enots reserve tap. Single central CEE-ESS type filler with rear fitted petrol balance pipe. Two bolt damper arm fixing. . Large cut aways underneath both sides to clear rocker box.
Numbered S6301 to S7100 (approx) - 4 valve 495cc with cast iron enclosed valve cylinder head, parallel inlet valves and parallel exhaust.18mm plug. BTH KD1 D4 magneto and DM3G dynamo. Oil feed to cylinder.
8” front and 7.5” rear, coupled with aluminium shoes.
Miller 8” headlamp with No 832 8-0-8 'Lighthouse' ammeter and 35E rear lamp. HF180 Clearhooter electric horn with Lucas LU76204 horn push. No stop light as standard.
4 speed gearbox with foot change on RHS. Aluminium oil bath chaincase with ‘R’ on dome and no separate filler on shock absorber dome. Heavyweight clutch.
Amal type 76/113 with Amal straight pull control. Original settings: main jet 150, slide 6/4, needle jet 106, needle position 2. Chrome plated copper fuel pipe.
Twin 1 3/4” low-level downpipes into barrel silencers and flared tailpipes.
80MPH illuminated trip speedometer. Lycett 6B pillion pad. Mechanism shield, battery cover, licence holder, cast central stand with lifting handle. 7/8” handlebars. Single toolbox with screw lid fitting fitted to RHS of machine. Steering damper and handwheel operated fork shock absorber. Round tubed forks. THAPEX tyre inflator. RH chainstay valence. Cover to front engine plates.
Upswept exhaust pipes. ISDT rear wheel. Blue or Maroon paint finish to mudguards & petrol tank only.