Rudge-Whitworth.com - The FREE technical site for Rudge Enthusiasts since 2001

Model Specifications

Rudge Trivia

Q: Did Rudge Whitworth invent the Whitworth thread?

A: No, there is no connection. The Whitworth thread form was invented by Sir Joseph Whitworth in 1841 and by 1860 the thread was in universal use in Britain and the USA - Source Biography titled 'Sir joseph Whitworth, the world's best machanician' by Norman Atkinson (acknowledgement to Stewart Wilkins).

 

Q: Why are 2 of the rivets holding clutch friction discs closer together?

A: When looking at modern reproduction clutch friction rings for Rudge clutches, 2 of the rivets are closer together as in the picture.

 

This feature is a left over from when RW manufactured the linings by forming them from a strip into a disc. This process meant that the 2 ends of the formed ring needed to be joined and RW did this by 'stitching' the 2 ends together using copper wire. To support this inherant weakness, RW placed a rivet either side of the join. No longer required today but the rivet holes are there!

 

Q: What is the groove under the filler of my gearbox for?

A: This indicates that the gearbox has come form a 1934-36 machinefitted with a mechanism shield. The shield is a tight fit and often rubs a mark into the underside of the filler. In severe cases the shield can wear through the filler with a subsequent loss of gearbox oil!

Rules

Follow us

Contact Info

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.


© 2020 Rudge Whitworth.com for Real Enthusiasts. Site developed by Woodlands Design and administered by Colin Chapple. Privacy Policy